StreakFree Multi-Surface Cleaning Paste

Directions for Use

1. Lightly moisten a soft cloth or sponge with water.
2. Apply a small amount of paste to the damp cloth or sponge — a little goes a long way.
3. Gently clean the soiled area using circular motions.
4. For tougher stains, allow the paste to sit on the surface for 30 seconds up to 15 minutes, depending on the level of buildup.
5. For sensitive surfaces such as glass, polished steel, or ceramic, always test in an inconspicuous area before full use. Do not apply to surfaces that are hot or warm.
6. Headlight Tip: One customer shared, “Works great on my headlights. I start by applying painter’s tape around the headlights to protect the surrounding paint. If the headlights aren’t too cloudy, you can polish them by hand using a microfiber towel. For heavily oxidized lenses, I switch to a drill attachment on a low speed for more cutting power. I typically don’t use sanding pads. Instead, I begin with a soft rubber pad and finish by buffing with a foam pad for a smooth, clear shine. To protect the restored finish, I apply a hard carnauba wax as the final step. carnauba wax 
7. Rinse thoroughly with clean water to remove all residue; insufficient rinsing may leave a chalky film.
8. Dry the surface with a clean towel or microfiber cloth to achieve a smooth, streak-free shine.